325 WATTS Installation PA Power Amplifier
High quality booster amplifier in standard 19” rack mountable chassis, suitable for both table-top use and rack mounting. Ideal for fixed installations and a wide variety of PA applications such as in departmental stores, schools, hospitals etc.
1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.
100V input is provided for connecting another amplifier’s output in long line applications.
Ground lift switch provided at rear panel which helps reducing the hum that occures due to multiple ground loops in the installations.
Resettable circuit breaker for protection against overload and short circuit.
Loop through output for connecting another booster amplifier.
19” Rack mountable chassis.
Instant transfer to DC power (Car Battery) if AC power fails.
- Power Output 415W Max., 325W RMS at 10% THD, 300W RMS at 5% THD, 275W RMS at 2% THD
- Output Regulation ≤ 2 dB, no load to full load at 1kHz Input Channels 1 × 200mV/470kΩ (unbal.), 2 × 1V/50kΩ (bal.), 1 × 100V Input
- Frequency Response 50-15,000Hz ±3dB Signal to Noise Ratio 60dB
- Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz Outputs Loop through 1 × 200mV/600W, 2 ×1V/1kW
- Speaker Outputs 4Ω, 8Ω, 70V & 100V Power Supply AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
- Power Consumption AC: 600VA DC: 7A
- Dimensions W485 × H142 × D405 mm
- Weight 20.6kg
